Quick contact

+48 576 156 777

office@housefromfactory.com

Open menu

Zx92

118,9 / 128,8m2

Usable / net area

Cubic volume

Roof angle

Minimum plot dimensions

Development area

House height

Roof area

Ceiling (first floor)

Roofing

Technology

Roof construction

Heating installation

DHW installation

Type of ventilation

Primary energy (Pe)

Final energy (Fe)

Zx92 is a house design created on the pattern of the “old cube”. It is one-story, with a flat roof, projected on a rectangular plan. It is simple and inexpensive to build.

The area of the building is about 120m2. The facade is white plaster with horizontal delicate rustication and laid gray stone. In addition, simple canopies over the entrance and over the terrace were designed.

First floor: the right side from the main entrance, located in the center of the front elevation, under the canopy, there is a passage to the utility room. Behind it is located the staircase leading to the first floor. Below them is a bathroom, designed with guests in mind, near the living room. It is adjacent to the study, which has a window on the garden side and an exit to the terrace, so that you can get some fresh air.

The left side of the house is the living, representative area, the kitchenette open to the living room and dining room. A set kitchen was placed in the front, while a needed pantry was placed in the middle, as well as a warm fireplace on the living room side. The living area features large glazing that extends from the dining room to the end of the living room.

Upstairs: as you enter the upstairs, a space for a deep built-in closet – ideal for towels, linens – or a place that can be used as storage – for mops, vacuum cleaner, ironing board, etc. – has been placed to the left. Opposite the staircase is the entrance to the master bedroom combined with a dressing room, through which you pass to a private bathroom. In the other part of the hallway – two, beautifully decorated bedrooms for children and one shared bathroom.

The Zx92 house is dedicated to a family with two or three children – remember, there is an additional room on the first floor, which does not necessarily have to be a study. The advantage of the project proposed to you is that 5 rooms are located on 120m2, one of which is a beautiful living room and the other is a master bedroom.

142311 PLN

Basic Package

Click for details

289305 PLN

Standard Package

Click for details

Ground floor 57,7 / 63,1m2

Siena

Hallway

Kitchen

Living room + dining room

Bathroom

Office

Utility room

Pantry

Attic 61,3 / 65,8m2

Hallway

Room

2nd room

3rd room

Closet

Bathroom

Plot

Minimum plot width

Minimum plot length

Dimensions of the front elevation

Variants

Individual projects

You have not found a ready solution for yourself …. nothing lost.

In the presented projects you can make adaptations and necessary changes.

It is not always worth it, therefore, we can also design for you a dream house from scratch (taking into account the needs of your family, land conditions and local development conditions).

If you already have a finished project from another company – we are able to price its construction if we get the right materials.

Feel free to contact us: office@housefromfactory.com

Basic Package

This is a basic program to get started. It allows investors to start construction and then with their own labor or local teams continue it. It’s not quite as popular still today in Eastern Europe, but it resembles it a bit. The Basic (mini) package gives you the huge advantage of professionally assembling the timber frame that makes up the structure of our house within 2 days.

What does the package include?

Exterior walls

Partitions

Roof construction

Standard Package

The house is made of prefabricated timber frame technology.

This range that is most often ordered. We make it for developers and individual customers.

The offer assumes the manufacture and installation of the elements, which will be produced in the manufacturing plant, along with the protection of the roof from precipitation.

Such a scope allows for a very short installation – the whole house about 3 – 5 days – and thus a reduction in costs.

Only typical construction, installation and finishing works will remain to be done.

What does the package include?

Exterior walls

Partitions

Roof construction

Woodwork

In addition, we provide

Standard+ Package

The house is made of prefabricated timber frame technology.

This range that is most often ordered. We make it for developers and individual customers.

The offer assumes the manufacture and installation of the elements, which will be produced in the manufacturing plant, along with the protection of the roof from precipitation.

Such a scope allows for a very short installation – the whole house about 3 – 5 days – and thus a reduction in costs.

Only typical construction, installation and finishing works will remain to be done.

The Standard+ Package is an expanded standard package with 7 additional elements

The Standard+ Package is the construction of your Z500 Collection home from shovel driven to exterior finish. The package price does not include installation and interior finishing.

What does the package include?

Exterior walls

Partitions

Roof construction

Woodwork

What does the package additionally include?

This site uses cookies to provide the highest level of service. Your continued use of the site means that you agree to their use. See our privacy policy.

Technologia tradycyjna – murowana

Opis?

Zalety

Wady

Technologie Prefabrykacji

Pod tą nazwą kryją się wszystkie technologie  budowy, w których gotowe ściany i duże elementy budowlane wytwarza się  w fabryce, poza miejscem budowy. 

Podstawowa cześć procesu budowy zaczyna się w fabryce. Wszystkie duże elementy takie jak ściany, dachy, schody czy stropy przygotowywane są w zakładach produkcyjnych metodami przemysłowymi.

Obecnie technologia prefabrykacji jest coraz bardziej zaawansowane i pozwala na wysoki poziom dokładności jakości i unikaniu typowych błędów.

Zalety

Wady